DESIGNED USE:

For use on new or previously painted interior masonry surfaces such as brickwork, plaster, cement rendering and asbestos cement where regular cleaning is a pre-requisite.

PERFORMANCE:

Easy Clean

Outlast Ordinary Emulsion

Good Hiding Power

Wide Colour Range

Good Adhesion Property

Good Colour Retention

Low VOC & Odour

Eco Friendly

SIRIM Eco Label

 

APPLICATION:

Drying Times	-	Surface dry : 10 min; Recoat : 1 - 2 hours.
Dilution	-	Clean household water.
Cleaning Up	-	Clean household water.

DILUTION RATIO :

Brush or Roller	-	Ready for use. If dilution is required, add up to 5% clean water.
Conventional Spray	-	Dilution of up to 10% water.
Airless Spray	-	Ready for use.

PAINTING SYSTEM :

New, unpainted surfaces

PAR
Primer Sealer

 

Recoat
1 - 2 hours

 

PAR Silk

 

Recoat
1 - 2 hours

Repainting

NB : PAR Primer Sealer DPP 1035 and PAR Plasterseal DPP 1001 work best on surfaces with a moisture content of below 15% and alkalinity below pH-9, otherwise premature paint failure may occur.

Limitations

• Not suitable for use in areas subject to frequent or heavy condensation, e.g. in some kitchens and bathrooms.