Details
DESIGNED USE:
For use on new or previously painted exterior masonry surfaces such as brickwork, plaster, cement rendering and asbestos where a rich matt finish is required. For exterior, use PAR Weathercoat which offers a 6 years performance warranty.
PERFORMANCE:
 |
Anti-Bacterial |
 |
Rich Matt Finish |
 |
Outlast Ordinary Emulsion |
 |
Easy Clean |
 |
Good Hiding Power |
 |
Wide Colour Range |
 |
Good Adhesion Property |
 |
Good Colour Retention |
 |
Low VOC & Odour |
 |
Eco Friendly |
 |
SIRIM Eco Label |
APPLICATION:
| Drying Times | - |
Surface dry : 10 min; Recoat : 1 - 2 hours. |
| Dilution | - | Clean household water. |
| Cleaning Up | - | Clean household water. |
DILUTION RATIO :
| Brush or Roller | - | Ready for use. If dilution is required, add up to 5% clean water. |
| Conventional Spray | - | Dilution of up to 10% water. |
PAINTING SYSTEM :
New, unpainted surfaces
PAR
Primer Sealer
Primer Sealer
Recoat
1 - 2 hours
1 - 2 hours
PAR
Supermatt
Supermatt
Recoat
1 - 2 hours
1 - 2 hours
Repainting
PAR Plasterseal 30% Dilution
Recoat
4 - 5 hours
4 - 5 hours
PAR
Supermatt
Supermatt
Recoat
1 - 2 hours
1 - 2 hours
NB : PAR Primer Sealer DPP 1035 and PAR Plasterseal DPP 1001 work best on surfaces with a moisture content of below 15% and alkalinity below pH-9, otherwise premature paint failure may occur.
View more about PAR SUPERMATT 5LT on main site