Details

---

Description :
-- Standard Grade and possesses similar properties to Mercury 2K 803 Poly Putty except that it is less viscous. Perfect curing at a temperature of 30 °C is taken slightly longer to dry. It can be coated both thick and thin.

-- Body filler is used to level the surface after the metalwork has reduced the damage to the slightly uneven metal. After straightening the metal is usually ground with a grinder in order to clean the metal and give it some ''tooth'' so that the filler can bond well with the surface.

- After the application of the first coat of filler the spreader is cleaned and the filler is allowed to get about as hard as cheese at which time it's easily leveled or shaped with a ''cheese grater'' blade then allowed to fully harden then it's block or board sanded to finish the leveling process.