Product Description

Satinwood (wood surface) from Dulux is a high quality solvent-based with a satin finish.

Application Description

For normal use thinning is usually not necessary, but if required add up to 1 part of Dulux Thinner 850-41 or white spirit to 10 parts of paint (10%). Add up to 1 part of Dulux Thinner 850-41 or white spirit to 10 parts of paint (10%). Ready for use.

Health & safety

Hazard warnings

Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin.Contains: ETHYL METHYL KETOXIME, COBALT CARBOXYLATE. May produce an allergic reaction. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label. Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position. Work in a well-ventilated area and do not breathe in vapor or spray. A suitable mask should be worn during sanding. When applying paint, it is advisable to wear eye protection. In case of firm use foam, dry powder, AFFF, CO2 – never use water. In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to Dulux Product Safety Data Sheet for further details.